FA
|
EN
WATERBASED LACQUER FOR FURNITURE
BRAND:
PRODUCT CODE:YO 05M585/—–
MAIN PROPERTIES:
• Excellent elasticity and soft touch effect • High matting uniformity
• Bi-component products
VERSION:
05M585 05 gloss clear
SUGGESTED USE:
To give the support a soft touch effect
APPLICATION METOD:
by spray: conventional air gun, airmix, airless,
PRODUCT PREPARATION:
add hardener YC—M402 at 6-10 % or as alternative YC—M403/—–
CHEMICAL PHYSICAL CHARACTRITICS AT23°C
Transparent
Solid content (%) 32 ± 2 Clear
Specific weight (g/cm3) 1,03 ± 0,020
Viscosity DIN 8 (s) 25 ± 5
Viscosity Brookfield (mPas) –
pH 7 – 8,5
APPLICATION CHARACTERISTICS:
Vertical application (μm wet) 120 Recommended n. of coats 1 coat
Recommended quantity per coat(g/m2)min: 120 max: 160
Interval between coats –
Spreading rate (m2/litres) 7 – 10
SUBSTRATE PREPARATION:
Clean the support with 280-320 grit paper or specific detergents. YO 05M585 may be applied on waterbased
coatings. For all other supports a preliminary check of adhesion and overcoating must be carried out
GENERAL REMARKS:
• Mix well before use.
• If properly stored at temperatures between 5 and 35°C, shelf life is 12 months
• On application the temperature of the product, the substrate, the coating and the working environment should never fall
below 15°C. Coatings applied at lower temperatures will show chemical and mechanical properties lower than standard
performances that can be normally achieved.
• Coating left over (washing waters, waters from spray booths, used coatings) must be disposed of according to local
regulations. Never dispose residues directly into drains.
• Application tools must be cleaned with water after use. When dry films must be removed, AY—M460, special detergent
should be used, letting it work overnight and then cleansing with water
DOWNLOADS:
ORDER THIS PRODUCT:
PRODUCT PREPARATION:
برند:
کد محصول:—-/YO 05M585
دانلود:
سفارش این محصول:
© 2024 LIAN — ALL RIGHTS RESERVED | WEBSITE DESIGN: STUDIO KOLY