FA  

|  

EN

Thixo waterborne basecoat for interior

WATERBASED LACQUER FOR FURNITURE

BRAND:

PRODUCT CODE:YL—M653 

MAIN PROPERTIES:

-Quick dry   -High build – Excellent transparency  – Automatic machine sanding

VERSION;

YL M653 Clear

RECOMMENDED USE:

– Industrial application – Turned parts – Fitted furniture – Windows frames  – doors

APPLICATION METODS:

Spray (conventional, airless, airmix). Electrostatic guns may be used provided they are suitable for
waterborne products

BLENDING INSTRUCTION:

Ready to use. May be further thinned with tap water if necessary
Note: at low temperature (below 15°C) the product’s viscosity increases dramatically and
it is needed add the thinner. We recommend to thin with a 2:1 blend of tap water and AYM444
to improve application and drying time

SUBSTRATE PREPARATION:

Clean well the surface, removing all traces of oil, wax and resins. The wood must be well dry (10-14% humidity
content). To minimize fibre raising the bare wood must be well sanded with 150 – 180 grit paper

CHEMICAL-PHYSICAL PROPERTIES(23 °C):

Solids content (%) 40 ± 1                                                      Specific gravity (g/cm3) 1,030 ± 0,030  
Viscosity DIN 8 (s) –
min:100 max: 180
Viscosity Brookfield (mPas) 10000 ± 2000 
pH 8 – 8,5

OVER-COATING: YL—M653/—-

can be over-coated both with waterborne top coat, or with solvent based top coat whatever polyurethane
or nitrocellulose.

GENERAL REMARKS:

-Mix well before use.
– If properly stored at temperatures between 5 and 35°C, shelf life is 12 months
– On application the temperature of the product, the substrate, the coating and the working environment should never fall below
15°C. Coatings applied at lower temperatures will show chemical and mechanical properties lower than standard performances
that can be normally achieved.
– Coating left over (washing waters, waters from spray booths, used coatings) must be disposed of according to local regulations.
Never dispose residues directly into drains.
– Application tools must be cleaned with water after use. When dry films must be removed, AY—M460, special detergent should be
used, letting it work overnight and then cleansing with water

DOWNLOADS:

ORDER THIS PRODUCT:

Thixo waterborne basecoat for interior

برند:

کد محصول:YL—M653

دانلود:

سفارش این محصول: