At 20°C a correct dilution is with 50% of Universal Nitro Thinner DNU, that will provide a very quick drying and also the correct spreadability.

Usually it is applied by spray, indifferently with air-mix or air-less system. On a clean and dust-free surface, better if insulated with Zapon Intermediate Gilding Insulator, apply an even and very light coat of Solvent-based Goldsize. Avoid any local excess, that will compromise the drying.

After 15-20’ (at 20°C) the surface is sticky and ready for leafing. After 60’ the surface can be pressed with a cotton buffer or paper buffer to enhance adhesion of leaf.

After 4 hours the goldsize is exhausted and no more sticky, then it can be protected with another coat of Zapon Intermediate Gilding Insulator.