FA
|
EN
WATERBASED LACQUER FOR FURNITURE
BRAND:
PRODUCT CODE: FL—M020
MAIN PROPERTIES:
– Pu base coat with excellent transparency and
high build, good resistance against removing also
with fast cycles.
-Suitable for fitted furniture
-Suitable for a wide range of support, raw and
veneered.
VERSION:
clear
RECOMMENDED USE:
-Fitted furniture – Turned parts
APPLICATION METHOD:
airless, airmix.
PROCUCT PREPARATION:
by weight: FL—M020 100
hardener FC—M001 50
thinner DF—M003 30
by volume: same ratio as the procedure by weight
CHEMICAL-PHYSICAL CHARACTERISTICS:
Solid content (%) 47 ± 1
Specific gravity (g/cm3) 0,980± 0,030
Viscosity Brookfield at 23°C (cps)[Spindle 3; 20 rpm 1.800±150
Interval between coats min: 30’ max: 4 h
Pot life (h) 2
APPLICATION CHARACTERISTICS:
Number of coats max 2
Recommended application weight max: 180 g/m2
Interval between coats min: 30’ max: 4 h
General remarks on the application system
Drying at 20° C and R.H. between 45 and 65%: 100
g/m2
Dust free 10’
Touch free 25’
Overcoating by topcoat 2 h
Sanding 1,5 h
stackable 2 h
SUBSTRATE PREPARATION:
The substrate has to be properly sanded with 180 grit paper.
Either solvent based stains serie TM—M006 or
TM—M007, or waterborne stains TY—M001 o TY—M003
OVER COATING:
With PU or Nitro topcoats
ALTERNATIVE HARDENERS:
FC—M006 at 50% High solid
FC—M220 at 50% Improve wet ability
ALTERNATIVE THINNERS:
DF—M006 To be mixed with DF—M003 to prolong drying time in summer season
DF—M001 Quick dry
GENERAL REMARKS:
The product has unlimited shelf life. However, after prolonged storage, some settlement may occur. It is
therefore advisable to homogenize the product well before using it.
CAUTION:
DOWNLOADS:
ORDER THIS PRODUCT:
برند:
کد محصول: FL—M020
دانلود:
سفارش این محصول:
© 2024 LIAN — ALL RIGHTS RESERVED | WEBSITE DESIGN: STUDIO KOLY