FA  

|  

EN

Matt Clear Acrylic Topcoat

WATERBASED LACQUER FOR FURNITURE

BRAND:

PRODUCT CODE:JO-XXM073

MAIN PROPERTIES:

-Application by spray and curtain coater
– Excellent anti-yellowing properties
-Also suitable for bleached wood
– Suitable for open-pore application on woods with a
well-defined pore

VERSION:

JO-03M073 3±1 Gloss                                                        JO-05M073 5±2 Gloss                                                       JO-10M073 10±2 Gloss
JO-15M073 15±2 Gloss                                                       JO-25M073 25±2 Gloss                                                    JO-35M073 35±2 Gloss
JO-50M073 50±2 Gloss                                                         JO-65M073 65±2 Gloss                                                    JO-90M073 90±5 Gloss

RECOMMENDED USE:

Flat parts, both veneer and solid wood

APPLICATION METHOD:

By spray and curtain coater

PRODUCT PREPARATION:

by weight:
JO-xxM073                   100
hardener FC—M070         10
thinner DF—M005            20
by volume :
same ratio as the procedure by weight

CHEMICAL-PHYSICAL PROPERTIES:

Solid content (%) 20 ± 1 
Specific weight (g/cm3) 0,930 ± 0,030 
Viscosity DIN 4 (s) at 23°C 37 ± 3  
Pot life (h) 24 h

APPLICATION CARACTHERISTICS:

Recommended quantity per coat max: 150 g/m2
 No. of coats max: 3
Viscosity DIN 4 (s) at
Interval between coats Min 1 h – max 12 h

GENERAL REMARK ON COATING SYSTEM:

Drying at 20°C and RU% between 45 and 65 : 100
g/m2

Dust free 15’ 
Touch free 40’
Stackable 3 h
Sandable 3 h 
Overcoating 3 h

Forced drying: 100 g/m2

                          Temperature         Time
Flash Off                 Room                15’
Laminar air                 50°C               50’
 Cooling                   Room               15’

SUBSTRATE PREPARATION:

With acrylic basecoat JL—M073 or JL—M070 for anti-yellowing coating systems.
JO-XXM073 can also be applied on any type of PU, PE or UV basecoats.

ALTERNATIVE HARDENER:

FC—M072 at 10% decreases the drying time.
FC—M073 at 10% decreases the drying time even more.

GENERAL REMARKS:

It is possible to increase the product’s surface hardness, the film’s toughness and its resistance to removal by
increasing the quantity of hardener up to 20%. In this case, the drying will be slightly slower and the dried film will show
a higher gloss level. The pot life will be a little shorter.
If applied on bleached wood, wait at least 48 h after bleaching.
The product has anti-yellowing properties. However, we recommend adding UV absorber AF—M900 at 3-5% on
bleached and light woods.
The product has unlimited shelf life. However, after prolonged storage, some settlement may occur. It is therefore
advisable to homogenize the product well before using it.

DOWNLOADS:

ORDER THIS PRODUCT:

Matt Clear Acrylic Topcoat

برند:

کد محصول:JO-XXM073

دانلود:

سفارش این محصول: