FA
|
EN
WATERBASED LACQUER FOR FURNITURE
BRAND:
PRODUCT CODE:YC—M4XX
MAIN PROPERTIES:
YC M400 1,10 80 For basecoats.
YC M401 1,10 70 For matt basecoats or topcoats.
YC M402 1,10 70 For general purposes. Suitable for matt topcoats and basecoats.
YC M403 1,08 60 For general purposes. For matt topcoats, glossy topcoats and parquet.
YC M404 1,06 51 For general purposes. For matt topcoats, glossy topcoats and parquet.
SUGGESTED USE:
Look at the TDS of the component A in order to suit the right quantity and application method of each .
GENERAL REMARKS:
– Adding the hardener by blending very well with a mechanical mixer.
– If the hardener is stored in rooms with temperature between 5 and 35°C, the shelf life is 6 months.
– Use the product mixed within 3 hours. Do not use the remaining mixed product after such a time.
Exceptions to this recommendation must be clearly written on the TDS of the component A.
– On application the temperature of the product, the substrate, the coating and the working environment
should never fall below 15°C Coatings applied at lower temperatures will show chemical and
mechanical properties lower than standard performances that can be normally achieved.
– Coating left over (washing waters, waters from spray booths, used coatings) must be disposed of
according to local regulations. Never dispose residues directly into drains
CROSSLINKER FOR WATERBASED COATINGS:
YC M407 0,5 – 1
For general purposes. Medium quick drying time and long pot life . For basecoats and topcoats.
YC M408 0,5 – 1
For general purposes. Quick drying time. To improve sanding of basecoats and stack ability of topcoats.
YC M419 1 – 2 For adhesion on glass, very slow drying time
SUGGESTED USE:
add crosslinkers slowly and by mechanical mixing. To get a lump free result, we
recommend to pre-mix crosslinker with same ratio of DTM075 .
When crosslinkers are used in coating systems with quick drying time, the % of product to be used shall be
decided on system test basis or on technical experience basis.
GENERAL REMARKS:
-If the product is stored in rooms at temperature between 5 and 35°C, the shelf life is 12 months
-Once added the crosslinker, use the mixed product within 24 hours . Do not use the remaining mixed
product. Remaining mixed product shall be always blended with same ratio of new mixed product.
-On application the temperature of the product, the substrate, the coating and the working environment
should never fall below 15°C . Coatings applied at lower temperatures will show chemical and
mechanical properties lower than standard performances that can be normally achieved.
– Coating left over (washing waters, waters from spray booths, used coatings) must be disposed of
according to local regulations. Never dispose residues directly into drains.
DOWNLOADS:
ORDER THIS PRODUCT:
برند:
کد محصول:YC—M4XX
دانلود:
سفارش این محصول:
© 2024 LIAN — ALL RIGHTS RESERVED | WEBSITE DESIGN: STUDIO KOLY