FA
|
EN
WATERBASED LACQUER FOR FURNITURE
BRAND:
PRODUCT CODE:YL—M590 / XX
MAIN PROPERTIES:
-Excellent elasticity -Excellent resistance against deforming -Can be pigmented
VERSION:
YL M590/ NTR Neutral, can be pigmented
YL M590/ C02 white
RECOMMENDED USE:
-For substrates highly
deformable
APPLICATION METOD:
Spray: airmix, airless, spray gun, . Electrostatic guns may be used provided they are suitable for
waterborne products.
BLENDING INSTRUCTIONS:
ready to use; for spray gun application, thinning with tap water at 5-15%
SUBSTRATE PREPARATION:
substate must be carefully cleaned, removing all traces of greas, oil or waxes. YL M590/NTR can be applied on a wide range of PU
foams. Adhesion should be always double checked as possible presence of releasing agents can affect the adhesion and
overcoating. It is recommend to apply the product on close cells urethane foams only. On open cells foams the result would be an
“orange peel” effect because of the difficulties to close the surface and keep the needed elasticity.
Pigmented pastes of series EY—M460/XX or EY—M500/XX can be added at a ratio of 2% -4%.
GENERAL REMARKS:
– Mix well before use.
– If properly stored at temperatures between 5 and 35°C, shelf life is 12 months
-Never apply at temperature below 15°c.
– Coatings applied at lower temperatures will show chemical and mechanical properties lower than standard performances that
can be normally achieved.
– Coating left over (washing waters, waters from spray booths, used coatings) must be disposed of according to local regulations.
Never dispose residues directly into drains.
-Application tools must be cleaned with water after use. When dry films must be removed, AY—M460, special detergent should
be used, letting it work overnight and then cleansing with water
DOWNLOADS:
ORDER THIS PRODUCT:
برند:
کد محصول:YL—M590 / XX
دانلود:
سفارش این محصول:
RELATED PRODUCTS
© 2024 LIAN — ALL RIGHTS RESERVED | WEBSITE DESIGN: STUDIO KOLY
