FA
|
EN
WATERBASED LACQUER FOR FURNITURE
BRAND:
PRODUCT CODE:RAF-T
Top coat Versions Opacity
FO1010 Very
FO1510 Very Matt
FO2510 Mat
Top coat Versions Opacity
FO4010 Medium Matt
FO7510 Semigloss
FO9510 Bright
Recommended Use:
Wall, ceiling and furniture
APPLICATION METHOD:
Spray
PRODUCT PREPARATION:
Dilute up to a max of 20% with PU thinner
PRODUCT APPLICATION:
Apply 2 coats of clear basecoat FL0510 spreading rate weight 150g/sqm each coat.Drying time 24 hours; sanding lightly with 320 grit sandpaper.Apply 1 coat of clear topcoat FOXX10 spreading rate weight 150g/sqm.
Total quantity to be applied: 450 g/sqm wet.
MAINTENANCE:
Surface can be cleaned with mild detergent and wet cloth, dry thoroughly after cleaning.To keep the product certificate it is recommended that you periodically check the condition of the coating film.If the support must be restored, apply the same approved amounts.
SUBSTRATE PREPARATION:
Clean the surface and sand with 120-150 grit sandpaper. Remove the old coating film completely.
GENERAL INFORMATION:
-Always mix the product well before use.
-Coating left over (washing water, water from spray booths, used coatings) must be disposed of
according to local regulations. Never dispose of residues directly in the sewerage system.
-After long storage periods, always check for any presence of sediment at the bottom of the container
and homogenize the product well before use.
– Do not store above 55 °C.
-In some environmental conditions, the product can develop some sensitivity to moisture. Avoid using it
in very damp premises.
DOWNLOADS:
ORDER THIS PRODUCT:
برند:
کد محصول:RAF-T
دانلود:
سفارش این محصول:
© 2024 LIAN — ALL RIGHTS RESERVED | WEBSITE DESIGN: STUDIO KOLY
