FA
|
EN
WATERBASED LACQUER FOR FURNITURE
BRAND:
PRODUCT CODE:JW—M019/XXXXX
MAIN PROPERTIES:
• It can be applied by spray
VERSION:
JW—M019/SWARO Crystal effect
JW—M019/GOLD Gold
JW—M019/RUBY Ruby red
JW—M019/TOPAZ Orange
JW—M019/BLACK Pearly black
JW—M019/PEARL Parl
JW—M019/-DARK Dark
JW—M019/F5909 Gold/green
JW—M019/F0904 Green/Blue
JW—M019/–RED Red
JW—M019/GREEN Green JW—M019/G5909 Iridescent gold/green
JW—M019/G0431 Iridescent blue/purple
JW—M019/G0904 Iridescent green/blue
JW—M019/-IRIDE Rainbow effect
JW—M019/BRONZ Crystalline bronze
JW—M019/XSTAL Xstal
JW—M019/–ICE Ice
JW—M019/F0431 Blue/Violet
JW—M019/-BLUE Blue
JW—M019/PINKY Pink/Gold
JW—M019/-LIME Metallized Lime
JW—M019/–ALU Aluminium
JW—M019/–RAME Copper
RECOMMENDED USE:
• Flat parts • Profiles
APPLICATION METHOD:
By spray gun
PRODUCT PREPARATION:
by weight:
JW-M019/XXXXX 100
Hardener FC—M070 10
Thinner DF—M003 40
by volume :
same ratio as the procedure by weight
CHEMICAL-PHYSICAL PROPERTIES:
Solid content (%) 26 ± 3
Specific gravity (g/cm3) 0,960 ± 0.030
Viscosity DIN 6 (s) at 23°C 22 ± 3
Pot life (h) 2
APPLICATION CARACTHERISTICS:
Recommended quantity per coat max: 120 g/m2
GENERAL REMARK ON COATING SYSTEM:
Drying at 20°C and RU% between 45 and 65 : 100
g/m2
Dust free 20’
Touch free 120’
* One coat of clear topcoat can be applied after drying
Forced drying: 100 g/m2
Temperature Time
Flash Off Room 15’
Forced air 40°C 40’
Cooling Room 15’
* One coat of clear topcoat can be applied after drying
* One coat of clear topcoat can be applied after
drying
SUBSTRATE PREPARATION:
The substrate must be prepared in advance by applying one or more coats of
black basecoat. We recommend considering the features of the substrate in
order to choose the most suitable basecoat.
ALTERNATIVE HARDENER:
FC—M072 at 10% decreases the drying time.
FC—M073 at 10% decreases the drying time even more.
GENERAL REMARKS:
It is possible to increase the product’s surface hardness, the film’s toughness and its resistance to removal by
increasing the quantity of hardener up to 20%. In this case, the drying will be slightly slower and the dried film will show
a higher gloss level. The pot life will be a little shorter.
If applied on bleached wood, wait at least 48 h after bleaching.
The product has anti-yellowing properties. However, we recommend adding UV absorber AF—M900 at 3-5% on
bleached and light woods.
The product has unlimited shelf life. However, after prolonged storage, some settlement may occur. It is therefore
advisable to homogenize the product well before using it.
DOWNLOADS:
ORDER THIS PRODUCT:
برند:
کد محصول:JW—M019/XXXXX
دانلود:
سفارش این محصول:
© 2024 LIAN — ALL RIGHTS RESERVED | WEBSITE DESIGN: STUDIO KOLY
