FA  

|  

EN

Acrylic Topcoat for melamine paper

WATERBASED LACQUER FOR FURNITURE

BRAND:

PRODUCT CODE:JO-XXC477/–NTR

MAIN PROPERTIES:

• To be used as direct topcoat on melamine paper
, excellent adhesion guaranteed
• Excellent adhesion even on metallic substrate
• Pigmentable at ratio 90:10 with PU pastes
series EF—M090/–CXX or EF—M060/–CXX
• Spray application
• Can be used on all substrates that may be
difficult on adhesion

VERSION:

JO-03C477/–NTR    3 ÷ 5 gloss (with pastes EF—M090/–CXX at ratio 90:10)
JO-20C477/–NTR  20 ± 2 gloss
JO-10C477/–NTR  10 ± 2 gloss

SUGGESTED USE:

• Flat parts • Profiles • Panels

APPLICATION METHOD:

conventional air gun, airless, airmix.

PRODUCT PREPARATION:

By weight:
JO-xxC477/–NTR      100
hardener FC—M070    30
thinner DF—M002       60
By volume:
Maintain same proportions

CHEMICAL-PHYSICAL PROPERTIES:

Solid content (%) 28±2 
Specific weight (g/cm3) 0,946 ± 0,030
Viscosity DIN 4 (s) a 23°C 60±5
Pot life (h) 6

APPLICATION CARACTHERISTICS:

Number of coatings             Max 1
Recommended quantity         max: 120 g/m2

GENERAL REMARK ON COATING SYSTEM:

Drying at 20°C and RU% between 45 and 65 : 100
g/m2

Dust free 20’
Touch free 60’ 
Overcoating Min 3 – max 12 h 
Sanding Not necessary, if overcoated within 12 hours

Forced drying: 100 g/m2

                          Temperature         Time
 Flash Off                 Room               20’
 Laminar air                50°C               60’                               Cooling Room 1

SUBSTRATE PREPARATION:

can be applied even directly on melamine paper

OVERCOATING:

with PU, PE, UV or nitro products

ALTERNATIVE HARDENER:

FC—M072 at 30% For cheaper cycles but with a decreasing adhesion on the most difficult surfaces.

ALTERNATIVE TINNERS:

DF—M003 Improves wettability

GENERAL REMARKS:

It has unlimited shelf life. However, after prolonged storage, some settlement may occur. It is therefore advisable to homogenize the product well before using it.Due to the large variety of melamine paper and metallic substrates available on the market, It is recommend to test the product in order to test the cycle on the selected support.It is necessary to properly dilute the product in order to obtain the most suitable flowing.

DOWNLOADS:

ORDER THIS PRODUCT:

Acrylic Topcoat for melamine paper

برند:

کد محصول:JO-XXC477/–NTR

دانلود:

سفارش این محصول: