FA
|
EN
WATERBASED LACQUER FOR FURNITURE
BRAND:
PRODUCT CODE:JL—M073
MAIN PROPERTIES:
• Colourless film: it keeps a natual wood
effect
• Excellent non yellowing properties
• Suitable for coating of chemically bleached
substrates (ammonia, oxygenated water)
• Excellent flowing and pore definition
• Suitable for open pore coatings of clear
wood (natural effect) such as maple, ash,
birch, oak.
VERSION:
clear
RECOMMENDED USE:
• Flat parts • Fitted furniture • Doors • Turned parts
APPLICATION METHOD:
conventional spray gun, airless, airmix and curtain coater
PRODUCT PREPARATION:
by weight:
JL—M073 100
hardener FC—M070 10
thinner DF—M002 20 – 30
by volume:
same proportions of catalysis by weight
CHEMICAL-PHYSICAL PROPERTIES:
Solid content (%) 21 ± 2
Specific weight (g/cm3) 0,910± 0,030
Viscosity DIN 4 a 20°C 37±3 sec
Pot life (h) 24
APPLICATION CARACTHERISTICS:
N° of coats max 3 Recommended quantity percoat max: 130 g/m2
Interval between coats min: 45 min max: 4 h
GENERAL REMARK ON COATING SYSTEM:
Drying at 20°C and RU% between 45 and 65 : 100
g/m2
Dust free 10’
Touch free 20’
Overcoatable with topcoat 3 h
Sandable 2 h
stackable 4 h
Forced drying: 100 g/m2
Temperature Time
Flash Off Room 10’
Laminar air 50°C 50’
Cooling Room 10’
SUBSTRATE PREPARATION:
sanding the wood with 180 paper grit. If to be painted, use solvent based stains serie TM—M006 or TM—M007. The product can be applied on chemically bleached substrates.
OVERCOATING:
with acrylic topcoats JO-XXM070, JO-XXM072, JO-XXM073
ALTERNATIVE HARDENERS:
FC—M072 at 10% Quickens drying time
FC—M073 at 10% Further quickens dryng time
For improving film resistance and drying of substrate, the catalysis can be increase from 10% to 20%,. We
suggest this % increase in case of 3 coats of products and in case of automatic sanding machine .
ALTERNATIVE TINNERS:
DF—M003 For summer season or in case of high temperature, high humidity leve
GENERAL REMARKS:
The product has unlimited shelf life. However, after prolonged storage, some settlement may occur. It is
therefore advisable to homogenize well the product before using it.
Wait at least 48 hours before applying it on bleached wood.
Appling it at temperature lower than 15°C may cause film brittleness and/or unevenness drying.
Not suitable for application on one-pack vinyl isolator as FI—M196.
The protective action against the wood colour changing of the acrylic products on rich in resin and light wood
( softwoods such as pine, spruce, larch) is lower than one achievable on light hardwood such as birch, ash, maple.
DOWNLOADS:
ORDER THIS PRODUCT:
برند:
کد محصول:JL—M073
دانلود:
سفارش این محصول:
RELATED PRODUCTS
© 2024 LIAN — ALL RIGHTS RESERVED | WEBSITE DESIGN: STUDIO KOLY